Installation Tools

For mortise locks in hollow metal doors. Economy version – mounts to steel door with four 8-32 screws (supplied). Zinc plated.

For Adams Rite MS1850 Deadlocks

GKL B15 snap-in bridge for mounting a compatible MS lock, deadlatch or blank faceplate in a narrow-stile aluminum storefront door.

An assortment containing 18 of the most commonly used and misplaced screws that are required when servicing locks. The LSA-1 kit contains mortise cylinder cam screws, cylinder set screws, face plate screws and others than can be missing or lost when on the job

Latch forming tool for lock installations, for use on standard 18 gauge steel doors.

Single flute 1/4” down shear router bit used to route openings in aluminum doors and frames

The LMB-01 will make installing cylindrical knob locks or dead-bolts on metal doors now faster and easier than ever. The LMB-01 mounting bracket is stamped from 11 gauge cold rolled steel for strength, installed with pop-rivets for convenience, and supplied with an adhesive template for accuracy. The LMB-01 mounting bracket is also cut out in the center to allow installations on metal doors with a center seam. The template is marked for 1” and 1-1/8” faceplate cutouts as well as for bracket mounting holes and center lines to locate the crossbore.