Search Results

For mortise locks in hollow metal doors. Economy version – mounts to steel door with four 8-32 screws (supplied). Zinc plated.

Economy version of Major’s LMB-01 bracket. Mounts to steel door with four 8-32 screws (supplied). Not suitable for use on steel doors with a center seam.

The LMB-01 will make installing cylindrical knob locks or dead-bolts on metal doors now faster and easier than ever. The LMB-01 mounting bracket is stamped from 11 gauge cold rolled steel for strength, installed with pop-rivets for convenience, and supplied with an adhesive template for accuracy. The LMB-01 mounting bracket is also cut out in the center to allow installations on metal doors with a center seam. The template is marked for 1” and 1-1/8” faceplate cutouts as well as for bracket mounting holes and center lines to locate the crossbore.

Latch forming tool for lock installations, for use on standard 18 gauge steel doors.

Single flute 1/4” down shear router bit used to route openings in aluminum doors and frames

Our most versatile drill guide for retrofit jobs. The HIT-111 is a multipurpose jig used on both wooden or metal doors to retofit cylindrical lever locks by Assa, Arrow, Corbin, Marks, Schlage, Russwin and many more

An assortment containing 18 of the most commonly used and misplaced screws that are required when servicing locks. The LSA-1 kit contains mortise cylinder cam screws, cylinder set screws, face plate screws and others than can be missing or lost when on the job

This multi-purpose nut driver is designed for Schlage Rhodes, Schlage Rhodes Interchangeable Core, Assa Brooklyn, Arrow Sierra, Sargent LN, NT Falcon and Omnilock locks.

At the center of our installation system is the HIT-45 modular clamp. Using a revolutionary design, the HIT-45 clamp will work on aluminum, wooden or hollow metal doors

Until now, installing a mortise cylinder in the proper location was a hit or miss proposition. With our HIT-22 it will always be in the right spot.